Skip to main content

EST-XCTRLINE-2

Loudspeaker line control card, 2 lines

At a glance

Overview

EST-xCTRLN-2 provides 2 independent speaker line outputs (A, B). Card allows to switch between main and spare amplifiers. Line measurement methods can be made by: Impedance, Loop or End of Line Module (EOL).
The measurement method is selected from the software configuration. EST-xCTRLN-2 provides fault detection, opening and ground leakage.

Technical specifications

Electrical
Current consumption
121 mA max. for 48 V
Power supply Internal form the Control Unit backplane
Type of connector 6 pin screw terminal type PHOENIX, 5.08 mm
Impedance measurement frequency 1 kHz to 48 kHz
Frequency of the signal for EOL modules 18 kHz to 24 kHz
Maximum measured current 20 A
Maximum measured voltage 200 V
Accuracy of measurement up to 5%
Physical
Physical dimensions
70 x 215 x 30 mm (W x H x D)
Accessories Screw terminals 6 pins, the distance between the partitions 5.08 mm
Environmental
Operating temperature
0 to +60°C
Storage temperature
-20 to +70°C
Relative humidity
15 to 80% noncondensing (operation)
5 to 95% noncondensing (storage)
Regulatory
Standards
EN54-16