EST-CU-11LCD
Control Unit with LCD (11 control slots)
- Compliance with EN54-16
- Network-based system allowing configuration, diagnostics and management via Ethernet
- Managing up to 254 devices on the network
- 11 slots available for any configuration of loudspeaker control cards and control input / output cards
- Built-in audio card with 4 inputs and 12 audio outputs
Related products
At a glance
Overview
EST–CU-11LT Control Unit (CU) is a matrix mixer of input signals which routes to 4 100 V internal audio buses, a 45-channel digital system buses or directly to audio outputs in a unit. EST-CU-11LT is designed to work for small PA & VE systems or as an extension unit in more complex systems. It means that the CU can function independently as the central unit of a small system or be part of a large complex system for which it represents another level of either territorial extension (operation in a remote structure) or functional extension (operation of further fire zones and loudspeaker lines in such a structure).
The modular design of the CU and its flexibility enables optimization of equipment and cost efficiency regardless of size / number of structures, their location and connectivity.
In the event of losing connectivity with a networked master unit, EST-CU-11LT is able to perform fire alarm scenarios independently thanks to the configuration recorded locally. While attached to the main communication ring of the system, EST-CU-11LT can control amplifiers and power supply managers as well as receive alarm and digital signals; and send them to other system devices.
EST-CU-11LT Control Unit distributes audio signals to individual zones and ensures that individual zones function properly. It also controls the condition of loudspeaker lines and amplifiers. If a fault is detected, it sends the signal to the system and automatically switches to a backup amplifier.
The CU is equipped with an EST-cAudIO-4/12 card offering 4 symmetrical line audio inputs and 12 symmetrical outputs to lead audio signals out to external devices or amplifiers of the EST ENT VES system.
Furthermore, EST-CU-11LT can be equipped with an LCD touch screen with a control module, which allows easy access to management functions and monitoring of the whole system – such extended configuration is included in EST-CU-11LCD Control Unit.
The modular design of the CU and its flexibility enables optimization of equipment and cost efficiency regardless of size / number of structures, their location and connectivity.
In the event of losing connectivity with a networked master unit, EST-CU-11LT is able to perform fire alarm scenarios independently thanks to the configuration recorded locally. While attached to the main communication ring of the system, EST-CU-11LT can control amplifiers and power supply managers as well as receive alarm and digital signals; and send them to other system devices.
EST-CU-11LT Control Unit distributes audio signals to individual zones and ensures that individual zones function properly. It also controls the condition of loudspeaker lines and amplifiers. If a fault is detected, it sends the signal to the system and automatically switches to a backup amplifier.
The CU is equipped with an EST-cAudIO-4/12 card offering 4 symmetrical line audio inputs and 12 symmetrical outputs to lead audio signals out to external devices or amplifiers of the EST ENT VES system.
Furthermore, EST-CU-11LT can be equipped with an LCD touch screen with a control module, which allows easy access to management functions and monitoring of the whole system – such extended configuration is included in EST-CU-11LCD Control Unit.
Details
- Compliance with EN54-16
- Network-based system allowing configuration, diagnostics and management via Ethernet
- Managing up to 254 devices on the network
- 11 slots available for any configuration of loudspeaker control cards and control input / output cards
- Built-in audio card with 4 inputs and 12 audio outputs
- Up to 12 messages played simultaneously in different zones
- Up to 32 GB SD flash memory designated for playback and recording messages (48 kHz, 16 bit)
- 1x POE port
- Support of up to 12 secured amplifiers
- Built-in 2 control inputs and outputs
- 2x 1 GB ports available for system extension
- Integrated DSP with implemented 3 band parametric EQ on all inputs on control units, 8 band parametric EQ, delay lines, audio limiter and feedback eliminator on each of the audio outputs
- Comprehensive solution based on RS485 functionality enabling seamless integration of the EST ENT VES system with 3rd party systems thanks to implementation of standard and proprietary communication interfaces
Technical specifications
| Electrical | ||
|---|---|---|
| Power consumption |
Up to 100 W (depends on configuration)
|
|
| Power supply | 48 VDC (operating range 40 to 57 VDC) connector with screw terminals M2.5, the distance between the partitions of 5.08 mm | |
| Input | ||
|---|---|---|
| Quantity and type |
4, Differential
|
|
| Connector type | 1 x RJ45 | |
| Input impedance | ≥10 kΩ | |
| Maximum input voltage | ≥3 Vrms | |
| Output | ||
|---|---|---|
| Quantity and type |
12, Balanced
|
|
| Connector type | 3 x RJ45 | |
| Frequency response | 40 Hz… 20 kHz (at 1 dB) / 400 Hz… 8 kHz (at 0,1 dB) | |
| Harmonic distortion (THD+IMD) | ≤0,05% | |
| Headroom | 10 dB | |
| SNR | ≥90 dB | |
| Channel separation | ≥80 dB | |
| Output impedance | 600 Ω | |
| Nominal output level | 1 Vrms | |
| Physical | ||
|---|---|---|
| Physical dimensions |
482 x 85 x 325 mm (W x H x D)
|
|
| Net weight |
Up to 8.4 kg (depends on configuration)
|
|
| Type of mount |
19" rack
|
|
| Number of control slots | 11 | |
| Number of function slots | 0 | |
| Messages | Supported SD card up to 32 GB. The set includes 512 MB SLC SDHC cards which provides more than 20 min of the messages | |
| LCD display | 272 x 480 resolution, 4.5" resistive LCD touchscreen | |
| DSP | Implemented 3 band parametric EQ on all 4 inputs of the control units 8 band parametric EQ, audio limiter, feedback eliminator and delay line on all of the audio outputs | |
| Fiber module – connector type / kind of fiber | Modules type SFP / Connector SC/LC / Multimode or single-mode / E 30 or E 90, OM lub OM2 | |
| Communication with PC | PC software: RJ45 connector twisted pair connection TIA / EIA568- B by the Ethernet protocol | |
| Available communication protocols | Modbus, SMS | |
| Finish case material | Steel / The front panel is made of metal plate painted black | |
| Accessories | 2 brackets and 4 screws for rack mounting, 9 caps for free slots, 48 VDC power and 100 V buses connectors | |
| Environmental | ||
|---|---|---|
| Operating temperature |
0 to +60°C
|
|
| Storage temperature |
-20 to +70°C
|
|
| Relative humidity |
15 to 80% noncondensing (operation & storage)
|
|
| Regulatory | ||
|---|---|---|
| Standards |
EN54-16
|
|
| Data communication | ||
|---|---|---|
| 1000BASE-X on the fiber | ||
| 2 SFP ports provide a redundant connection | ||
| 1000BASE-TX / RJ45 CAT5E cables – 2 ports including 1 port with POE | ||
| 100BASE-TX / RJ45 CAT5 cables – LAN/WAN for PC connection | ||
Downloads
All downloadsCPD / CPR
Datasheet
Certificates
Commercial documentation
Application note
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.