EST-XCTRLINE-2
Loudspeaker line control card, 2 lines
Alternative products
Related products
At a glance
Overview
EST-xCTRLN-2 provides 2 independent speaker line outputs (A, B). Card allows to switch between main and spare amplifiers. Line measurement methods can be made by: Impedance, Loop or End of Line Module (EOL).
The measurement method is selected from the software configuration. EST-xCTRLN-2 provides fault detection, opening and ground leakage.
The measurement method is selected from the software configuration. EST-xCTRLN-2 provides fault detection, opening and ground leakage.
Technical specifications
| Electrical | ||
|---|---|---|
| Current consumption |
121 mA max. for 48 V
|
|
| Power supply | Internal form the Control Unit backplane | |
| Type of connector | 6 pin screw terminal type PHOENIX, 5.08 mm | |
| Impedance measurement frequency | 1 kHz to 48 kHz | |
| Frequency of the signal for EOL modules | 18 kHz to 24 kHz | |
| Maximum measured current | 20 A | |
| Maximum measured voltage | 200 V | |
| Accuracy of measurement | up to 5% | |
| Physical | ||
|---|---|---|
| Physical dimensions |
70 x 215 x 30 mm (W x H x D)
|
|
| Accessories | Screw terminals 6 pins, the distance between the partitions 5.08 mm | |
| Environmental | ||
|---|---|---|
| Operating temperature |
0 to +60°C
|
|
| Storage temperature |
-20 to +70°C
|
|
| Relative humidity |
15 to 80% noncondensing (operation)
5 to 95% noncondensing (storage)
|
|
| Regulatory | ||
|---|---|---|
| Standards |
EN54-16
|
|
Downloads
All downloadsDatasheet
Certificates
Non EU certificate
CoC
DoC
DoC_20-8300-356-3304_EST Panel
DoP
Carrier F&S - DoP_20-8300-360-3307_EST
DoC
DoC_20-8300-356-3307_CNBOP
Commercial documentation
CPD / CPR
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.