Skip to main content

EST-DFMS

Fireman Microphone
  • Monitored microphone and connection of the microphone module to the system
  • A dedicated evacuation key
  • 3 fully-programmable keys with a possibility of connecting up to five 20-key extensions
  • Built-in 2 contact inputs and 2 relay outputs
  • POE or external feeder based power supply
View all

At a glance

Overview

A EST ENT VES fireman microphone is a monitored external device working with Control Units in a redundant communication ring. It can thereby perform a superior function of a system control unit, too.

A fireman microphone can be used to activate alarm messages as well as general public announcements, to choose individual zones and to broadcast live voice messages. It is equipped with programmable function keys which can be used to assign functions as required. Up to 5 EST-EKB-20M keyboard extensions with additional function keys can be attached to a fireman microphone.

A CPU switch enables immediate and direct broadcasting of announcements to all zones without any involvement of the control system even during a failure of the central processor. The microphone is able to automatically detect a key failure and an audio path from the microphone capsule (inclusive) to the Control Unit.

A fireman microphone is also equipped with an intercom function and is able to communicate with other microphones in the system.

Details

  • Monitored microphone and connection of the microphone module to the system
  • A dedicated evacuation key
  • 3 fully-programmable keys with a possibility of connecting up to five 20-key extensions
  • Built-in 2 contact inputs and 2 relay outputs
  • POE or external feeder based power supply
  • Black-box function – recording all announcements played during an alarm
  • Built-in SFP modules and CAT5e for simplicity of implementation of the loop topology
  • RS485 for communication with external systems
  • Intercom function between all fireman and zone microphones

Technical specifications

Electrical
Power consumption
266 mA max. for 48 VDC / 5 keyboard extensions
Power source via LAN PoE or local power supply complies with EN 54-4
Input voltage 48 V connector 2 pin screw 5.08 mm
Physical
Physical dimensions
150 x 55 x 210 mm (W x H x D)
Transmission medium fiber, UTP Cat. 5e
Number of parametric inputs 2
Number of relay outputs 2
Connector type for logic input/output screw 3.5 mm, 6 pin
Type of fiber optic modules type SFP / connector SC / LC / multimode or single-mode / E 30 or E 90, OM lub OM2
Accessories connector with screw terminals 6 pins, the distance between the partitions 5.08 mm
Environmental
Operating temperature
0°C to +60°C
Storage temperature
-20°C to +70°C
Relative humidity
15 to 80% (operation)
5 to 95% (storage)
IP rating
31
Regulatory
Standards
EN54-16
Listening speaker
Output 0.5 W
SPL 78 dBA (at 1m, 1W)
Frequency response (3 dB) 450 Hz … 8 kHz
Audio input
Frequency response 400 Hz – 6 kHz (at 3 dB)
Impedance 500 Ω
Signal -40 to 30 dBu
Sensitivity -66 dB
Cable type, length spiral, 1.5 m
Microphone connector 5 pin DIN
Keyboard and controls
Number of buttons 3
Number of control panel buttons 2 LED / button
Dimensions of the buttons description 15 x 25 mm
Three normative LED controls color LEDs: power – green / failure – yellow / alarm – red
Logic Input / Output
Number of I / O logic 2 independent channels; galvanically isolated; each channel has 1 fully programmable input and output (NO / NC)
Parametric input source for monitor mode passive; standard resistors 10 k || 10 kΩ or 4,7 kΩ - - 4,7 kΩ detection thresholds 0/1 / open / set in the application configuration
Type of socket I / O logic 6-pin screw terminal type PHOENIX, 3.5 mm
CPU-OFF switch slide switch, two position, signaling LED color: yellow