DI-9301E
Innovation Intelligent Input/Output Module
- Supervised input
- Input support for normally open or normally closed contacts
- Input may be linked or separated from output
- Potential free, changeover relay output
- Electronically addressed
Related products
At a glance
General
The DI-9301E is an intelligent, digital single input and relay output module. It communicates with the fire alarm control panel (CIE) via 2 wires using a digital protocol. The activation status of the relay is locally indicated for status verification.
Applications
Typical input applications include fire suppression devices, water flow indicators, pressure switches, position switches for doors and ventilation shafts, signal valves for extinguishing systems, or any device that is able to provide an ON/OFF signal. With its potential free, changeover relay output any suitable devices can be signalled to start or stop.
Details
- Supervised input
- Input support for normally open or normally closed contacts
- Input may be linked or separated from output
- Potential free, changeover relay output
- Electronically addressed
- Powered directly from the fire panel loop, no external power supply requirements
- LED status indication for activation and fault
- Din-Rail or surface mount support
- Ground fault detection support
- EN 54-18 approved and LPCB marked
Technical specifications
| General | ||
|---|---|---|
| Status indication |
LEDs
|
|
| Compatibility |
GST DI-9000E systems
|
|
| Addressing method |
Electronic
|
|
| Address range |
1 or 2
|
|
| Electrical | ||
|---|---|---|
| Power supply type |
Loop powered
|
|
| Operating voltage |
24 VDC (16 to 28 VDC)
|
|
| Current consumption |
≤ 0.5 mA (Standby)
≤ 0.7 mA (Activated)
|
|
| Input | ||
|---|---|---|
| Input quantity |
1
|
|
| Input type and rating |
NO/NC Dry Contact, Supervised
|
|
| Input states |
Active
Fault
Normal
|
|
| Termination resistor |
4k7Ω
|
|
| Output | ||
|---|---|---|
| Output quantity |
1
|
|
| Output type and rating |
Potential free changeover (Form C), 2A @ 24 VDC
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
85.3 x 78.0 x 33.0 mm
|
|
| Shipping weight |
± 66.5 g
|
|
| Colour |
Traffic white (RAL9016)
|
|
| Mounting type |
DIN-rail
Surface mount
|
|
| Material |
ABS
|
|
| Cable specification |
≥1.0 mm²
|
|
| Environmental | ||
|---|---|---|
| Vandal proof |
No
|
|
| Operating temperature |
-10 to +55°C
|
|
| Relative humidity |
≤ 95%, non-condensing
|
|
| Environment |
Indoor
|
|
| IP rating |
IP20
|
|
| Regulatory | ||
|---|---|---|
| Compliancy |
CE
REACH
RoHS
WEEE
|
|
| Certification |
CPR
|
|
| Standards |
EN54:18
LPCB Marked
|
|
Downloads
All downloadsDatasheet
Other EU certificate
CPD / CPR
Installation sheet
Certificates
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.