99202
A45E-2 A-series EN mini interface
- Addressable input interface unit
- Low profile
- DIN rail mounted
- Supervises normally open input circuits
- Monitors input circuit wiring for open or short circuit faults
Related products
At a glance
Overview
The A45E-2 addressable interface (input unit) and is designed for installation within the enclosures of equipment associated with fire detection systems. The unit is installed directly onto the ZP loop wiring, carries a system address and enables signals from associated equipment to be interfaced into the fire alarm system. Input signals are fully displayed at the control panel and can be programmed to activate any system output.
By routing loop wiring and installing interfaces adjacent to input equipment, system integrity is increased and the need for long spur wiring between equipment terminals and the fire alarm interface is eliminated.
By routing loop wiring and installing interfaces adjacent to input equipment, system integrity is increased and the need for long spur wiring between equipment terminals and the fire alarm interface is eliminated.
Installation and mounting options
Approved to EN54-18, the A45E-2 can be installed singly, or used in groups to provide multiway inputs from equipment such as volt free, zonal outputs from conventional fire alarm systems or flow valves from sprinkler installations. Housed in a low profile, single width moulding the interface is designed to clip directly onto a standard DIN rail fixing or be installed in a SMB-DIN1 box (two unit capacity), or a SMB-DIN2 box (four unit capacity).
Installed as part of an addressable system, up to 127 line devices (detectors, call points or interface units) may be connected to each of the control panel loops. All loop devices incorporate switch settings enabling them to be assigned a unique address which is polled by the panel every two seconds.
Installed as part of an addressable system, up to 127 line devices (detectors, call points or interface units) may be connected to each of the control panel loops. All loop devices incorporate switch settings enabling them to be assigned a unique address which is polled by the panel every two seconds.
LED indication
A red LED indicator positioned on the front moulding flashes when the interface has operated, providing clear identification of the input signal source.
Details
- Addressable input interface unit
- Low profile
- DIN rail mounted
- Supervises normally open input circuits
- Monitors input circuit wiring for open or short circuit faults
- Approved to EN54:18 and CPR certified
Technical specifications
| General | ||
|---|---|---|
| Status indication |
LED (red) flashing on operation
|
|
| Compatibility |
All ZP addessable systems
|
|
| Addressing method |
DIP Switches
|
|
| Address range |
1 to 127
|
|
| Electrical | ||
|---|---|---|
| Power supply type |
Loop powered
|
|
| Operating voltage |
Pulsed 19.5 to 20.5 V, line drop < 4 VDC
|
|
| Current consumption |
600 µA (quiescent)
700 µA (alarm)
|
|
| Input | ||
|---|---|---|
| Input quantity |
1
|
|
| Input type and rating |
Supervised
|
|
| Input states |
Active
Normal
Open
Short
|
|
| Alarm resistor |
1.8 kΩ
|
|
| Termination resistor |
3.9 kΩ
|
|
| Cable specification | < 10 m (from switching terminals) | |
| Physical | ||
|---|---|---|
| Physical dimensions |
45 x 78 x 28 mm (W x H x D)
|
|
| Net weight |
40 g
|
|
| Colour |
White
|
|
| Mounting type |
DIN-rail
Wall mount
|
|
| Material |
Moulded ABS
|
|
| Cable specification |
2 core (screened)
|
|
| Environmental | ||
|---|---|---|
| Vandal proof |
No
|
|
| Operating temperature |
-10 to +55°C
|
|
| Storage temperature |
-10 to +55°C
|
|
| Relative humidity |
20 to 95% noncondensing
|
|
| Environment |
Indoor
|
|
| IP rating |
IP20
|
|
| Regulatory | ||
|---|---|---|
| Compliancy |
CE
REACH
RoHS 3
WEEE
|
|
| Certification |
CPR
|
|
| Standards |
EN54-18
|
|
Downloads
All downloadsDatasheet
Certificates
DoP
KGS F&S - DoP_360-5211-0599_A45E-2
DoC
KGS F&S - DoC_10-5211-356-0599_A45E-2
Non EU certificate
.Others - VMC_BOMBA (Brunei)_BFNR/RND/FDNAS/HSEENGINEEERING/ZITON ( 717A )_ZP7
Installation sheet
Technical documentation
Other EU certificate
Other EU certificate
VMC_APF-1322_A45E-2, A50E-2
Other EU certificate
VMC_PR-1936/064_Ziton ZP-2 (2010-2 series)
Other EU certificate
VMC_PR-2017/064_ZP2-A series
Other EU certificate
VMC_PR-1751/064_ZP-2 (2010-2 series)
Other EU certificate
VMC_APF-1807_ZP-2
Other EU certificate
VMC_APF-1326_ZP2
CPD / CPR
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.