Skip to main content

99102

A50E-2 A-Series addressable mini relay unit
  • Addressable interface unit
  • Low profile
  • DIN rail mounted
  • Loop powered - installed adjacent to equipment to be switched
  • Operated from any combination of input addresses
View all

Related products

At a glance

Overview

The A50E-2 is an addressable relay providing single pole, volt free, change-over contacts. The unit is intended for installation within the equipment to be switched, thereby offering savings in installation costs when compared to long, auxiliary circuit, wiring runs out from the control panel. Approved to EN54-18, the relay may be located anywhere on the two core ZP loop and is designed for power up or shut down of building services, for example air conditioning plant, in fire conditions.

The unit is ideal for the control of associated system equipment such as door release circuits or the emergency shutdown of high risk services, for instance gas or oil supply valves in boiler rooms.

Installation and mounting options

The relay can be programmed to be activated by any single device, groups of devices or all system devices. All types of system input signals can be arranged to operate the A50E-2 which can include control panel indicators, zonal outputs, call points or detectors.

Housed in a low profile, double width molding the interface is designed to clip directly onto a standard DIN rail fixing or be installed in a SMB-DIN1 box (one unit capacity), or a SMB-DIN2 box (two unit capacity).

Installed as part of an analogue addressable system, up to 127 line devices (detectors, call points or interface units) can be connected to each of the control panel loops. All loop devices incorporate switch settings enabling them to be assigned a unique address which is polled by the panel every two seconds.

LED indication

A red LED indicator positioned on the front molding flashes when the interface has operated, providing clear identification of the signal source.

Details

  • Addressable interface unit
  • Low profile
  • DIN rail mounted
  • Loop powered - installed adjacent to equipment to be switched
  • Operated from any combination of input addresses
  • Volt free, change over contacts
  • EN54:18 approved and CPR certified

Technical specifications

General
Status indication
LED (red), flashing on operation
Compatibility
ZP7 Series Systems
Addressing method
DIP Switches
Address range
1 to 127
Electrical
Power supply type
Loop powered
Operating voltage
Pulsed Loop 16 to 20.5 V
Current consumption
<600 μA (Quiescent)
<850 μA (Active)
Output
Output quantity
1
Output type and rating
Single pole, change over, 1 A @ 30 VDC / 0.3A @ 40 VAC
Physical
Physical dimensions
85 x 78 x 28 mm (W x H x D)
Net weight
40 g
Colour
White
Mounting type
DIN-rail
In cabinet
Wall mount
Material
Moulded ABS
Cable specification
2 core loop (screened)
Environmental
Vandal proof
No
Operating temperature
-10 to +55ºC
Storage temperature
-10 to +55ºC
Relative humidity
20 to 95% noncondensing
Environment
Indoor
IP rating
IP20 (EN60529)
Regulatory
Compliancy
CE
REACH
RoHS 3
WEEE
Certification
CPR
Standards
EN54-18
Environmental
EEC89/336