Skip to main content

TCC-0007

IS sounder/beacon, 24 V, amber lens
  • Approved by ATEX, IECEx
  • Group I MI Ex ia I Ma
  • Group II IGD Ex ia IIC T6 Ga, Ex ia IIIC T85˚C Da
  • Zones 0, 1, 2, 20, 21 & 22
  • Conforms to: EN 60079-0:2012 + All:2013 (IEC 60079-0:2011) EN-60079-11:2012 + (IEC 60079-11:2011)
View all

At a glance

IS Sonos sounder beacon

The IS Sonos sounder beacon has been approved for use in potentially explosive atmospheres for Group I (Mining) & Group II (Above Ground) applications and incorporates a high Ingress Protected IP66 enclosure.
The sounder beacon unit incorporates a two stage alarm option and has a total of 32 selectable tones, selectable via a dip switch on the PCB and produces up to 105 dB at 1 meter. A specially designed time saver base enables quick and easy installation of this unit with no extra cabling to be made to the head of the unit.
Connections are made to the base during the initial wiring phase which results in a faster more reliable installation. The sounder head simply twists & clicks into the pre-fixed base on commissioning avoiding any additional wiring & connections.
Further details can be found on the installation sheet’ This unit must be used in conjunction with an approved Zener Barrier or Galvanic Isolator. The characteristics should not exceed Uo: 28 V, Io: 93 mA, Po: 660 mW, Ci: 0, Li 0. The minimum value of Uo should not drop below 23.6 V and the minimum value of Io should not drop below 50 mA.

Application

Fire, Security, Process Control and general signalling applications.

Details

  • Approved by ATEX, IECEx
  • Group I MI Ex ia I Ma
  • Group II IGD Ex ia IIC T6 Ga, Ex ia IIIC T85˚C Da
  • Zones 0, 1, 2, 20, 21 & 22
  • Conforms to: EN 60079-0:2012 + All:2013 (IEC 60079-0:2011) EN-60079-11:2012 + (IEC 60079-11:2011)
  • Diode Polarised and End of Line resistor compatible
  • Dustproof and weatherproof

Technical specifications

General
Compatibility
TCC-0012, GBX370
System support
Conventional intrinsically safe systems
Electrical
Power supply type
24 VDC
Operating voltage
24 VDC
Current consumption
33 mA
Sounder
Output level
>105 dB(A)
Selectable tones
32
No. of stages
2
VID
Colour
Amber
Flash frequency
1 Hz or constant (ON)
Physical
Net weight
0.33 kg
Colour
Red
Mounting type
Base mount
Mounting position
Ceiling
Wall
Mounting base
Deep
Material
Flame retardant Polycarbonate
Environmental
Vandal proof
No
Operating temperature
-40 to +55ºC
Relative humidity
>90% at 20ºC
Hazardous environment rating
Intrinsically safe - Zones 0, 1, 2, 20, 21 & 22
IP rating
IP66
Regulatory
Compliancy
CE
REACH
RoHS 3
WEEE
Certification
CENELEC/ATEX
CPR
Standards
ATEX (EMT17ATEX0012X) IECEx (EMT 17.0005X)
EN54-3